BenQ E2220HD, Service Manual

Page: 42 / 83

21.5 ″ LCD Color Monitor BenQ E2220HD
42
HDMI Auto
Switch
When this function is activated,
HMDI port will be in the input auto
select loop. Otherwise, HDMI can
only be selected by input select or
by hot key.
Press the
ENTER
key to select
this option. Press the ▲ or ▼
keys to change the setting.
y ON
y OFF
Reset All
Resets all mode, color and
geometry settings to the factory
default values.
Press the ▲ or ▼ keys to
change the settings.
• YES
• NO
*DDC/CI, short for Display Data Channel/Command Interface, which was developed by Video Electronics
Standards Association (VESA). DDC/CI capability allows monitor controls to be sent via the software for remote
diagnostics.
Display Timing Table
Pixel Hor. (KHz) Ver. (Hz) Pixel CLK (MHz) Source 21.5W
640 x 350 31.47 70.09 25.18 VGA
640 x 480 31.47 59.94 25.175 VGA
640 x 480 37.50 75.00 31.500 VGA
720 x 400 31.47 70.08 28.321 VGA
800 x 600 37.88 60.32 40.000 VESA
800 x 600 46.88 75.00 49.500 VESA
832 x 624 49.72 74.55 57.283 MAC
1024 x 768 48.36 60.00 65.000 VESA
1024 x738 60.02 75.03 78.750 VESA
1152 x 720 44.86 60.00 66.750 CVT 0.83 MA
11520 x 870 68.68 75.06 100.000 MAC
1152 x 900 61.80 65.96 92.978 SUN
1280 x768 47.396 60.0 68.25 CVT 0.98M9-R
1280 x 800 49.702 59.81 83.5 CVT-8
1280 x 800 62.8 75 106.5
1280 x 720 45.00 59.94 75.25