10 Operating the camera
Eng
lish
To select a flash mode:
1. Go to the Capture mode.
2. Keep pressing
to toggle among different flash modes and select a desired option.
Macro mode
To select Macro mode:
1. Go to the Capture mode.
2. Keep pressing
to toggle between Auto focus and Macro modes.
Drive mode
To select a drive mode:
1. Go to the Capture mode.
2. Keep pressing
until the corresponding mode icon shows on the screen.
To use M-Burst:
1. Go to the Capture mode.
2. Press
>
>
M-Burst
.
3. Press
>
Interval
, and then select an interval time.
4. Select
Shots
, and then choose the number of total shots.
5. Press .
6. Press .
7. Keep pressing
until the corresponding mode icon shows on the screen.
Icon
Mode
Description
Auto focus
Adjusts focus automatically.
Macro
Used when capturing images at a close distance.
Icon
Mode
Description
--
Standard
Takes one picture at a time.
Self-timer
Automatically takes a picture after 2 or 10 second delay.
This mode is useful when you want to be part of the picture.
Burst
Continuously takes pictures as long as you keep pressing
the Shutter. The flash is always off in this mode.
M-Burst
Takes thumbnail shots (each shot at the VGA quality
)
into one single image in the number of 2 x 2 (4 shots), 3 x 3
(9 shots), or 4 x 4 (16 shots). This function is useful when
you want to capture a continuous motion like swinging a golf
club. The flash is always off in this mode.
E1240_UM - EN.book Page 10 Monday, January 25, 2010 9:06 AM
