Preparing the camera for use 3
Eng
lish
Charging the battery
The battery charge status affects the camera performance. To maximize the performance
and the battery life, fully charge the battery using the camera and the specified power
adapter, and then fully discharge it through normal use (at least once).
C
To remove the battery:
1. Open the battery cover.
2. Press and hold the battery.
3. Release the battery lock lever.
4. When the battery has come out a little, gently pull it
out the rest of the way.
5. Close the battery cover.
D
To charge the battery:
1. Turn off the camera.
2. Insert the battery into the camera.
3. Connect one end of the power adapter to the
camera.
4. Connect the other end of the power adapter to a wall
outlet. The battery will start charging immediately.
• Turn off the camera before removing the battery.
• Please fully charge the Li-ion battery before using it for the first time.
• When the battery is being charged, the status LED indicator flashes in blue. When the
battery is fully charged, it continues to light up in blue.
• Use only the specified battery type. Using other types of battery may damage the
camera and invalidate the warranty.
• Ensure that the Li-ion battery is inserted into the product with correct polarity. Incorrect
polarity may damage the camera or cause fire.
• Download all pictures and remove the battery from the camera if you are going to store
the camera for a long time.
• Damage caused by the use of an incorrect power adapter is not covered under the
warranty.
• The battery may be warm after being charged or used. This is normal and not a
malfunction.
• When using the camera in a cold environment, keep the camera and its battery warm
by holding it inside your jacket or another warm protective environment.
E1240_UM - EN.book Page 3 Monday, January 25, 2010 9:06 AM
