4 Preparing the camera for use
Eng
lish
Preparing the camera for use
Use only the specified battery for the camera, and always turn off the camera before
removing the battery.
Charging the battery
The battery charge status affects the camera performance. To maximize the performance
and the battery life, fully charge the battery using the specified charger and AC power
adapter, and then fully discharge it through normal use at least once.
A
To install the battery:
1. Open the battery cover (A).
2. Insert the battery in the correct direction by matching
the + - label on the battery cover (B).
3. Push the battery all the way down.
4. Close the battery cover (D).
B
C
To remove the battery:
1. Open the battery cover.
2. Pull the battery out (C).
3. Close the battery cover (D).
D
To charge the battery:
1. Insert the battery into the battery charger.
2. Connect one end of the AC power adapter to the
battery charger.
3. Connect the other end of the AC power adapter to a
wall outlet.
4. When the battery is being charged, the charger LED
indicator lights up in red. When the battery is fully
charged, it turns into green.
E103X_E123X_UM - EN.book Page 4 Thursday, August 6, 2009 10:37 AM
Downloaded from ManualsCamera.com Manuals
