![background image](http://html.mh-extra.com/html/benq/e1020/e1020_user-manual_2733702010.webp)
2 Preparing the camera for use
Eng
lish
Camera: rear view
Preparing the camera for use
Use only the specified battery for the camera, and always turn off the camera before
removing the battery.
1. LCD display
2. W (Wide)
- Zoom-out or thumbnail
view (Playback mode)
3. T (Tele)
- Zoom-in
4. Strap eyelet
5. Playback mode button
- Toggle
between Capture and Playback modes)
6. MENU button
(for entering or
exiting menu)
7. Multifunctional buttons (including a 4-
way control) plus an
button (for
entering or exiting a setting)
8. Scene mode
• It is normal for the camera to become warm during operation, because the camera
casing can conduct heat.
• The LCD display on this camera is manufactured with sophisticated technology, and
more than 99.99% of the pixels on the LCD display meet standard specifications. Yet,
it is possible that less than 0.01% of the pixels on the LCD display may have some light
spots or show unusual colors. This is normal and does not indicate display
malfunction, nor will this affect the pictures you take with the camera.
A
To install the battery:
1. Open the battery cover (A).
2. Insert the battery in the correct direction by matching
the + - label on the battery cover (B).
3. Push the battery all the way down, until the battery
lock lever clicks into place (C).
4. Close the battery cover (D).
B
E1020_UM - EN.book Page 2 Tuesday, November 18, 2008 6:32 PM
Downloaded from ManualsCamera.com Manuals