![background image](http://html.mh-extra.com/html/benq/dc-e1000/dc-e1000_user-manual_2733665020.webp)
Eng
lish
Using the Camera
16
3.7.4 Setting the ISO
With the initial settings, the ISO sensitivity is automatically set according to the brightness of
the subject.
• A higher ISO value increases the image noise. To take clean images, use an ISO value as
low as possible.
3.7.5 Setting the Exposure
Set the exposure value manually to compensate for unusual lighting conditions such as
indirect indoor lighting, dark backgrounds, and strong backlighting.
3.7.6 Setting the AEB
Sets the auto exposure bracketing (AEB) to shoot 3 continuous images, each with a different
exposure setting: correctly exposed, underexposed, and overexposed.
3.7.7 Setting the highlight
Make the subject stand out from its surroundings. The subject will be in focus in three
different ranges:
/
/
.
3.7.8 Setting the sharpness
You can select whether you want the image to have sharp or soft outlines.
3.7.9 Setting the photo effect
You can add special effects to your images in REC or PLAY mode.
SH1
(Custom)
For more accurate adjustment or when the light source cannot be
specified. When this option is highlighted, press the shutter button
to enter the
[Custom WB]
mode. Then, point the camera at
something white (for example, white paper) as the reference white
color. Next, press
OK
to confirm the custom setting.
Icon Mode
Description
Hard
The edges of the image are emphasized. The edges will become sharp, but
noise may occur in the recording image.
Normal The edges of the image are sharp. This is suitable for printing.
Soft
The edges of the image are softened. This is suitable for editing images on
PC.
Icon
Description
Normal
No effect is added to the image.
B&W
Convert image to black & white.
Sepia
Recorded image will be stored in a sepia tone.
Negative
Opposite what they were in the original image.
Red
The image becomes reddish.
Green
The image becomes greenish.
Icon
Mode
Description
DC_E1000_UM.book Page 16 Friday, September 7, 2007 9:34 AM