![background image](http://html.mh-extra.com/html/benq/dc-c1060/dc-c1060_user-manual_2733644010.webp)
Eng
lish
Preparing Your Camera for Use
4
2
Preparing Your Camera for Use
2.1
Installing the batteries
You can use two AA batteries to power up the camera.
Make sure that the power of the digital camera is off
before removing the batteries.
To insert the batteries:
1. Make sure the camera is turned off.
2. Open the battery cover.
3. Insert the batteries in the correct direction as
shown in the illustration.
4. Close the battery cover.
To remove the batteries:
1. Make sure the camera is turned off.
2. Hold the camera with the battery cover facing upward, and then open the battery cover.
3. Remove the batteries.
•
High-capacity (such as 2500 mAh) rechargeable batteries are recommended.
•
Carbon-zinc batteries are not recommended.
•
Remove the batteries from the camera if you do not intend to use the camera for a long
time.
•
If the lens cannot retract into the camera, please replace the batteries first (usually this is
because of drained batteries). Then the lens should retract automatically. (Under no
circumstances should you push the lens back manually as this may damage the camera.)
If the lens still cannot retract, please contact your dealer.
•
The AA batteries that came with the camera are not rechargeable.
2.2
Inserting and removing an SD memory card
The camera is equipped with internal memory,
allowing you to record video clips and capture
images. You can also expand the memory capacity by
using an optional SD (Secure Digital) memory card
to store more files.
1. Always make sure the camera is turned off before
inserting or removing a memory card.
2. Insert an SD memory card in the correct
direction as shown in the illustration.
3. Close the battery / SD memory card cover.
To remove the SD memory card, make sure the camera is turned off. Press lightly on the
edge of the memory card and it will eject.
DC_C1060_C850_UM CD EN.book Page 4 Thursday, September 18, 2008 9:12 AM