Eng
lis
h
Using the Camera
5
Using the Camera
3.1
Turning the Power On and Off
1. Press the POWER button to turn on the
camera in the Record mode. Or you can
press the
button to turn on the camera
in the Playback mode.
2. Press the POWER button again to turn
the power off.
•
You can turn on the camera without the
start-up and operating sound by pressing
and holding the POWER or the
button
for over 1.5 seconds.
3.2
Power Saving Function
If the camera is turned off by Power Save feature, press the POWER or the
button to turn
it on again.
The Power Save feature does not work in the following situations:
•
Connecting the camera to a computer or printer with the USB cable.
•
Connecting the camera with the AC adapter (sold separate).
•
About the Power Save operation, refer to 3.16.3 “Setting the Power Save” on page 22.
3.3
Switching between Record and Playback
You can switch between Record mode and Playback mode in following ways:
3.3.1 In Record mode
•
Press the MODE button to cycle through the still image shooting, voice recording,
and movie recording.
•
Press the
button to switch to the Playback mode.
•
If you switch to Playback mode, the lens will retract after approximately 10 seconds.
3.3.2 In Playback mode
Press the MODE or the
button switch to the previous used Record mode.
1
Press down halfway
2
Press down fully
DC_C1000_UM.book Page 5 Wednesday, June 7, 2006 10:54 AM
