![background image](http://html.mh-extra.com/html/benq/dc-5330/dc-5330_user-manual_2733641011.webp)
BenQ DC 5330 User’s Manual
7
3.2. Capture Mode
Capture mode will allow you to shoot single and continuous images, set your flash
and self-timer. Depending on the environment and setting, the camera’s settings will
work accordingly. To exit the setting menu, simply press the menu button.
3.2.1. Shooting images
1. Under Capture Mode, press the shutter button. The camera will start checking
whether the memory is sufficient to store the image. If it is full, a warning “Memory
Full” icon will display on the LCD.
2. Once the picture is taken, you can erase the image under instant review. user can
protect image when in playback mode
3. If you decide to erase this image, press down. An erase icon will appear on the
LCD, press OK to achieve this function.
Basic Shooting
1. Turn the mode dial to the capture mode
2. Look into the viewfinder/LCD and try to align your
subject in the crop mark.
3. When you are set, press the shutter button once.
Auto-Focus Function
Under Auto-Focus, the camera lens focuses automatically when the shutter release is
pressed halway. To activate Auto-Focus, please follow these steps:
1. Crop mark is white in normal situation. Press half shutter
to activate auto focus. Crop mark turns green when
focused. If fail, crop mark is red.
2. Then, fully press the shutter button to take the picture.
Summary of Contents for DC 5330
Page 1: ...DC 5330 User s Manual ...