Using the Camera
The USB Mass Storage Device Mode
This mode allows you to use the camera as a USB mass storage device which makes it easier to save
large files (not only pictures) or transfer them.
Using Digital Camera 1016 as a USB Mass Storage Device
Refer to the graphic 1on page 12 to connect the camera to PC using the USB cable. Enable the "USB
mass storage device mode" feature by repeatedly pressing the Function Mode select button until the
"
" icon is displayed on the LCD Display panel. After you connect the DC 1016 to your PC, a
“new USB mass-storage device found” message will appear on the screen. Then, the DC 1016
becomes a mass-storage device and will be used as a new drive under your operating system. It’s
capacity is 16 MB. By using this mass-storage device, you can save not only pictures but also large
files in the camera or transfer them from your PC to this camera.
Transferring the Pictures in Camera to PC or Application Programs
In this section, we will show you how to transfer the pictures in the camera to your PC or the
bundled software programs.
It is assumed that you have already installed the digital camera driver and bundled soft-
ware into your computer. If not, install software as instructed in the section on “Install-
ing Digital Camera Software” on page 5 of this manual.
Before you can use the pictures in camera, you need to connect the camera to your PC. Refer to
the graphic 1on page 12 to insert one end of the USB cable into the camera's USB port, and the
other end to the USB port of your PC. Or, you can insert the digital camera directly into the USB
port of your PC.
