![background image](http://html1.mh-extra.com/html/benq/cp270/cp270_user-manual_2734479050.webp)
Maintenance
50
11.
Restart the projector.
Do not turn the power on with the lamp cover removed.
Resetting the lamp timer
12.
After the startup logo, open the On-Screen
Display (OSD) menu. Go to the SYSTEM
SETUP: Advanced > Lamp Settings menu.
Press Mode/Enter. The Lamp Settings page
displays. Press to highlight Reset lamp
timer and press Mode/Enter. A warning
message displays asking if you want to reset the lamp timer. Highlight Reset and press
Mode/Enter. The lamp time will be reset to '0'.
Do not reset if the lamp is not new or replaced as this could cause damage.
10.
Tighten the screws that secure the lamp
cover.
•
Loose screw may cause a bad connection,
which could result in malfunction.
•
Do not over tighten the screws.
Reset Lamp Timer?
Reset
Cancel
Notice