![background image](http://html1.mh-extra.com/html/benq/cp270/cp270_user-manual_2734479049.webp)
Maintenance
49
5.
Lift the handle so that it stands up. Use
the handle to slowly pull the lamp out
of the projector.
•
Pulling it too quickly may cause the lamp
to break and scatter broken glass in the
projector.
•
Do not place the lamp in locations where
water might splash on it, children can
reach it, or near flammable materials.
•
Do not insert your hands into the projector
after the lamp is removed. If you touch the
optical components inside, it could cause
color unevenness and distortion of the
projected images.
6.
As shown in the figure, lower the new
lamp into the lamp compartment
while aligning the lamp with the holes
in the lamp compartment. Make sure it
fits in the projector.
7.
Tighten the screw that secures the lamp.
•
Loose screw may cause a bad connection,
which could result in malfunction.
•
Do not over tighten the screw.
8.
Ensure the handle is fully laid flat and
locked in place.
9.
As shown in the figure, replace the lamp
cover on the projector.