![background image](http://html.mh-extra.com/html/benq/c510/c510_user-manual_2733630009.webp)
En
gl
is
h
Preparing Your Camera for Use
3
2
P
REPARING
Y
OUR
C
AMERA
FOR
U
SE
2.1
Installing the battery
Make sure that the power of the camera is off before inserting
or removing the battery.
To insert the battery:
1. Slide the battery / SD memory card cover.
2. Insert the battery in the correct orientation shown.
•
Tilt the battery lock lever and orient the battery in the
direction of the arrow, so that its label is facing to the
front side of the camera, and then insert the battery.
3. Close the battery / SD memory card cover.
To remove the battery:
1. Slide the battery / SD memory card cover.
2. Release the battery lock lever.
3. When the battery has come out a little, gently pull it out the rest of the way.
2.2
Inserting and removing an SD memory card
(optional accessory)
The camera is equipped with 16 MB internal memory (14
MB available for image storage), allowing you to record
video clips and capture images. You can also expand the
memory capacity by using an optional SD (Secure Digital)
memory card to store more files.
1. Always make sure the camera is turned off before
inserting or removing a memory card.
2. Insert an SD memory card in the correct orientation as
shown in the illustration.
3. Close the battery / SD memory card cover.
To remove the SD memory card, make sure the camera
is turned off. Press lightly on the edge of the memory card and it will eject.
•
Be sure to format the SD memory card with this
camera before the initial use.
•
To prevent valuable data from being accidentally
erased from an SD memory card, you can slide the
write-protect tab (on the side of the SD memory
card) to “LOCK”.
•
To save, edit, or erase data on an SD memory card,
you must unlock the card.
DC_C510_UM.book Page 3 Tuesday, April 18, 2006 10:10 AM