Operations
14
Powering the Speaker
Standby mode
When you have finished using the speaker press the power button to place it
into standby mode. In standby mode the power LED indicator will light up
orange.
Turning off the speaker
1.
Plug the speaker to a power source
using the supplied power cable. The
power LED indicator will light up
orange indicating that the speaker is
in standby mode.
2.
Press the power button. The power
LED indicator will turn off and the
control panel will display a welcome
message. Once the welcome
message is finished you can begin
using the speaker.
After powering on, the following audio
sources can be used without internet
access or the use of the treVolo A app:
Bluetooth®, RCA, AUX, SPDIF.
When the speaker is in standby mode the heatsink will continue to disperse heat from
the speaker’s amplifier. Do not be alarmed if the heatsink is still warm to the touch
while the speaker is in standby mode.
If you do not plan to use the
speaker for a long duration or want
to conserve energy you may unplug
the speaker from the power source
after placing the speaker in standby
mode.
