Introduction
Thanks you for purchasing Benq AEN100/101 Fast Ethernet Card. This
guide is to provide the installation and usage of this product for network
installers and users. The AEN100/101 10/100Mbps Fast Ethernet Card
complies to PCI 2.1 and PCI 2.2 specification and supports half/full duplex
feature which can double network speed.
The AEN100/101 support both 10Mbps and 100Mbps network speed,
100Base-TX operates on two pairs of category 5 UTP cable and 10Base-T
operates on Category 3,4,5 UTP cable.
With the Auto-Negotiation technology, network speed is auto detected.
When you connect it to 10Base-T hub via UTP cable, the network speed
becomes 10Mbps. Similarly, if you connect it to 100Base-TX hub, the
network speed is 100Mbps. If the hub is a switching hub that supports
full duplex function, then the speed will be doubled to 20Mbps/200Mbps.
Real hassle free installation is achieved by conforming to PCI bus. Just
plug in the card and all setup is done automatically. No more software to
run!
Furthermore, the AEN100 Fast Ethernet Card supporting the Wake On
LAN (WOL) feature allows users to configure network card that are
capable of “listening to” network packets even when the computer is
turned off.
The AEN100/101 supplies many drivers including ODI driver for NetWare
3.x/4.x/5.x, NDIS driver for Microsoft LAN Manager,
Windows95/98/NT/2000/Me, Linux, and a Packet Driver for TCP/IP
software. Whatever your requirements are ease of installation, superior