29
Metering
This sets the metering method for calculating the exposure.
Capture Md.
This sets the recording method at the time of capturing images.
Digi. Zoom
This sets whether or not to use digital zoom at the time of photography.
* On / Off
Find Blur
Refer to the section in this manual titled “Find Blur” for further details.
* On / Off
Preview
This sets whether or not to display the captured image on the screen immediately after the
image is captured.
* On / Off
Date Print
The date of recording can be printed directly on the still images. This function must be activated
before the image is captured.
* On / Off
* Center:
Averages the light metered from the entire frame, but gives greater weight to
the subject matter at the center.
* Spot:
A very small portion of the center of the screen is measured to calculate the
correct exposure.
* Average:
The exposure is measured all of the image area.
* Single:
Captures one image at a time.
* Web Auction:
Permits capture of up to 4 images. Creates an 2x2 layout to combine 4
shots into a single image.
* Creative
composition:
Permits capture of up to 4 images. Creates an 4x1 layout to combine 4
shots into a single image.
* Continuous:
Permits continuous capture of up to 3 images.
* AEB:
Permits 3 consecutive images in the order of standard exposure,
underexposure and overexposure compensation.
* Burst:
Permits continuous photography while pressing and holding the shutter
button. As long as you hold the shutter button pressed, images are
captured until the memory capacity is exhausted.
* Cont.flash:
Permits continuous capture of up to 3 images with flash.
* Pre-shot:
Lets you capture the background first, and then have someone to capture
you in front of it.
* Burst 30fps:
Permits continuous capture of up to 30 images in the resolution
640 x 480 within 1 seconds.
* Interval Capture: Captures continuous images at a preselected time interval.
