User’s Manual
E-9
Operation Instructions
Load a CD disc
Press the eject button on the CD-ReWriter front panel and the tray will eject
automatically.
Put the CD disc in the tray with the labeled side up.
Press the eject button or slightly push on the front of the tray to close the tray.
When a CD disc is loaded, you should be able to read files properly on the disc
within a program.
Removing a CD disc
Press the eject button on the CD-ReWriter front panel.
Remove CD disc from the tray.
Press the eject button or slightly push on the front of the tray to close the tray.
Maintenance
Typically, the CD-ReWriter needs no maintenance or cleaning. Most problems will be
prevented if you keep CD discs clean. Use lens-cleaning cloth to slightly wipe away dusts
on disc surface and avoid scratching it.
Emergency Eject
If the tray does not eject automatically, you may manually pull out the tray. Follow these
steps:
♦
Switch off the power.
♦
Insert a straightened paper clip into the emergency hole (please refer to the
illustration in Front View). The tray will be partially ejected.
♦
Gently pull out the tray.
