6
Installation without tools (no drilling)
If you have a KITCOOL 2.0 W/O HEADREST or KITCOOL 2.0 Mini W/O HEADREST, you can skip step 2.
INSTALLATION AND ADJUSTMENT
CAUTION
When using the product for the first time, we recommended that your approved dealer explains
configuration of the accessory and makes the adjustments with you!
WARNING
Before use, check that your KITCOOL 2.0 is compatible with the width of your wheelchair's seat. There
are two models (standard from 36 cm to 52 cm / mini from 26 cm to 35 cm).
Installation steps
1.
Take KITCOOL 2.0 out of the box
2.
Straighten the headrest until it locks into place with a click
3.
Lift the magnetic pin
4.
Swivel the base a ¼ turn, putting the tab on the side of
the castor, then put the magnetic pin in the 1
st
or 2
nd
hole
5.
Put out the castor to the stop and listen for the click,
it is securely locked
6.
Loosen the 2 clamps and 2 screws
7.
Open the locking clamps wide
8.
Fit and centre on the handles of the wheelchair. The headrest
must be aligned with the wheelchair
3.
6.
4.
7.
5.
8.
2.
