Benning MM 7-2, Operating Manual

Page: 25 / 50

Device description
4.2 Functions
5235 / 05/2022 en BENNING MM 7-2 25
4.2.11 Further setting options
The device offers further setting options. To change a setting, press and hold one of the
following keys and simultaneously set any measuring function from the “OFF” position of the
rotary switch of the device until the corresponding symbol is shown on the digital display.
• Blue “Function” key: Temporarily disables the automatic switch-off (APO, Auto-Power-Off)
(“dSAPO” is displayed). If the device is switched off (switch position “OFF”), the automatic
switch-off (APO) will be enabled again when you switch the device on again.
• “RANGE” key: Disables (“dSbEP” is displayed) or enables (“EnbEP” is displayed) the
acoustic signal of the device. The device saves the last setting and automatically preselects
it even after being switching on again.
Enabling or disabling temperature units
The measured temperature [
}
page 38] can be displayed in °C or °F. If both temperature units
are enabled, you can select the temperature unit before measuring the temperature.
Alternatively, you can disable a temperature unit so that it is not possible to select it prior to
temperature measurement.
• Enabling the temperature units °C and °F:
– Press and hold the “VoltSense” key and simultaneously set any switch position from the
“OFF” position of the rotary switch of the device until “C‑F” is shown on the digital
display.
• Disabling the temperature unit °F:
– If necessary, enable the temperature units °C and °F.
– In the switch position “Temperature measurement”, press the blue “Function” key to set
the temperature unit °C and switch the device off (switch position “OFF”).
– Press and hold the “PEAK” key and simultaneously set any switch position from the
“OFF” position of the rotary switch of the device until “C” is shown on the digital display.
• Disabling the temperature unit °C:
– If necessary, enable the temperature units °C and °F.
– In the switch position “Temperature measurement”, press the blue “Function” key to set
the temperature unit °F and switch the device off (switch position “OFF”).
– Press and hold the “PEAK” key and simultaneously set any switch position from the
“OFF” position of the rotary switch of the device until “F” is shown on the digital display.