Bennett SITE MASTER EMV, Assembly

Page: 8 / 28

Bennett Site Master Instruction Manual Safety instructions
4
GENERAL INFORMATION
Read this manual carefully and read all tags/labels attached to the Site Master before starting any maintenance and/or service. A Site
Master that is not properly maintained will not perform properly and will void the Bennett Limited Warranty.
Before installation, operation, maintenance and/or service ensure that protection against lighting strikes are in accordance with the
American Petroleum Institute Recommended Practice RP 2003,
Protection Against Ignitions Arising out of Static, Lightening, and Stray
Currents .
Service of the Bennett products and all accessories must be performed by a technician who is trained in accordance to all codes, standards,
and regulations.
HAZARDOUS LOCATIONS
For safe operation, ensure that the dispenser is in a classified area as detailed below per NFPA 30, Flammable and Combustible Liquids
Code and NFPA 70, National Electric Code . For further information on the classification of locations for Fuel Dispensers, see NFPA 30,
Flammable and Combustible Liquids Code.
CODES AND STANDARDS
Follow all local, state, and federal requirements for installation of all equipment.

API 2003 – Protection Against Ignitions Arising Out of Stray, Lightning, and Stray Currents

NFPA 30 – Flammable and Combustible Liquids Standard

NFPA 30A – Motor Fuel Dispensing Facilities Standard

NFPA 70 – National Electric Code

International Fire Code – 2018 Edition
UNAUTHORIZED ALTERAT ION OF BENNETT PRO DUCTS
DANGER: BEFORE PERFORMING ANY TYPE OF SERVICE TO THE DISPENSERS, BE SURE TO SHUT OFF ALL ELECTRICAL
SUPPLIES AND SECURE THEM IN THE OFF POSITION. CLOSE ALL VALVES IN INCOMING PIPING. MAINTENANCE
MUST BE PERFORMED BY TRAINED PERSONAL ONLY.
Bennett Pump Company products are designed to meet or exceed the standards of Underwriters Laboratories, Inc., Federal
Communication Commission, and National Institute of Standards and Technology. Compliance with these standards protects the operator
and the consumer from personal injury and ensure an accurate delivery of product. Any deviation from the use of authorized
replacement parts or alteration of a designed product configuration may cause personal injury, death or the revocation of one or all of
the above approvals.
Bennett Pump Company will not assume responsibility or liability for any consequential injury or damage caused by the unauthorized
alteration of its products.
ABBREVIATIONS AND AC RONYMS
AC Alternating Current
CPU Central Processing Unit
DC Direct Current
FCC Federal Communications Commission
Hz Hertz
IFC International Fire Code
NEC National Electrical Code
NIST National Institute of Standards and Technology
No. Number
PCI Payment Card Industry
POS Point of Sale
Qty. Quantity
SBC Single Board Computer
SSC Security Standards Council
SSP Simply Secure Payment
THHN T hermoplastic H igh H eat-resistant N ylon-coated
UL Underwriters Laboratories, Inc.
VAC Voltage Alternating Current
VASC VeriFone Authorized Service Contractor
VDC Voltage Direct Current
W&M Weights and Measures