10
BASIC OPERATION
Power ON
POWER SWITCH
Rotate to adjust the volume level, to turn the power ON and OFF.
Setting a frequency
UP/DOWN KEYS
Selects the operating frequency. [UP] / [DN]
Push [D•CLR] to select
frequency
mode
Push [C•MR] to select
channel
mode
Setting audio/squelch level
To set the audio level
Rotate [VOL] to set the desired audio level while receiving a signal.
To set the squelch level
While pushing [SQL], push [UP]/[DN] to set the squelch level.
•The squelch level “0” is loose squelch,“25” is tight squelch.
4
Receive and transmit
Adjust audio volume to the desired level.
Set a frequency.
When a signal is received:
• Squelch opens and audio is emitted from the speaker.
• Signal indicator shows the relative signal strength level.
Push [A•
FUNC
], then push [9•
H/L
] to toggle output power between high and low.
• “L” appears when low output power is selected.
Push and hold [PTT] to transmit, then speak into the microphone.
• “TX” appears.
•
Do not
hold the microphone too close to your mouth or speak too loudly. This may
