Benezan Electronics
Hard- and software development
Breakout Board Installation Guide
Nicolas Benezan, Stauffenbergstr. 26, 72108 Rottenburg
Phone: +49 (0) 7457/946365 0 benezan-electronics.de
Page
Netbob1 installation.docx22.09.2020
Beamicon2 Breakout Board
Interface board for
CNC control up to
4 axes via Ethernet
Installation manual
Version 1
Brief product description
The interface board allows the operation of up to four stepper motor or servo output stages with the Beamicon2 CNC software. A
normal network connection with RJ45 cable is used for data transfer from the PC. No LPT port is required, and the well-known
limitations of step frequency and timing problems are a thing of the past. The board can be adjusted to many different
configurations. Depending on the selected configuration, additional functions such as control of a frequency converter or speed
controller, reference switches, up to 2 relay outputs and an output for a holding brake are available.
All signals are galvanically isolated from the PC, so that a maximum of noise immunity is achieved. All machine-side signals
are designed for 24V level, ensuring robustness and compatibility with industrial sensors. Ready-made connection cables for
BEAST stepper motor power amplifiers, UHU-DC servo controllers and brushless servo systems (BLAST, SpeedCube and
Sanyo-Denki R-series) are available (not included), so that quick and error-free wiring is possible.
