9. Headlight Beam Adjustment
The headlight beam can be adjusted up
and down in the vertical direction.
The headlight beam adjustment
bolts are located in the top
left corner and top right corner
of the glove box. To adjust,
open the glove box and using a
screwdriver turn the screw to
adjust the headlight beam. Turn
clockwise to lower the headlight
turn counterclockwise to raise
the headlight beam.
①Adjuster bolt for the high beam
② Adjuster bolt for the low beam
10. Headlight Bulb Replacement
Prior to replacement, follow the instructions below:
a. Remove the screws from the headlight access panel;
b. Remove the headlight access panel;
c. Remove the rubber cover from the backside of the head-
light ①;
d. Disconnect the wiring plug ②;
e. Release the headlight bulb retainer clip and remove the
bulb ③;
f. Install the new bulb without touching the glass surface of
the bulb.
Reinstall the loose parts in reverse order of above.
11. Parking Lamp Replacement
The parking lamp bulbs should be re-
placed as follows:
a. Gently pull the rubber bulb holder
from between the high beam
and low beam headlights.
b. Remove the bulb from the holder
①, insert a new bulb and reinsert
the bulb holder into the headlight.
12. Fuse Replacement
Caution:
Remove any grease or dust on the bulb with a clean cloth
during bulb replacement.
