manualshive.com logo in svg

Benelli Tornado TNT600, Owner'S Manual

Share
Download
Benelli Tornado TNT600 Owner'S Manual Download Page 6

5

1. 

Rider and passenger capacity.

 

This motorcycle is designed only for two riders.

2. 

Road surface for riding.

         

 This motorcycle is suitable for highway riding.

3. 

Please carefully read this user manual. Careful and proper riding running-in will ensure the 

stable and smooth running of your motorcycle.

Please pay special attention on the following:-

IMPORTANT NOTES

Note 

: This is for the maintenance or more important events explanations.

Caution

 : This is for the operating specifications of the motorcycle.

Warning

 : This is for the important procedures that may endanger safety of the 

rider or would bring injuries if ignored.

The User Instruction should be considered as a permanent manual for the motorcycle. Please 

give it to the new owner if you transfer the motorcycle.
No copy or reproduction of any part in this manual without written approval from Benelli.

Summary of Contents for Tornado TNT600

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands