manualshive.com logo in svg

Benelli Tornado TNT600, Owner'S Manual

Share
Download
Benelli Tornado TNT600 Owner'S Manual Download Page 47

46

Braking system

Please check the following conditions of the braking system every day:

(1) 

Check if there is leakage of the front and rear wheel braking system. 

(2) 

The brake lever and the brake pedal should have a certain amount of support  

 resistance. 

(3) 

Check the wearing condition of the brake pad. The essential of checking brake pad  

 

is to watch if the pad is worn. If exceeds the limit line, the two brake pad should be  

 

replaced together. 

The motorcycle use DOT3 or DOT4 brake fluid. Take care not to allow brake fluid to get into with paint 

surface or plastic surface because these surfaces will be corroded.

If the braking system or brake disc of your motorcycle needs to be repaired, we recommend that the repair 

should be carried out by authorised distributors. They are equipped with complete tools and proficient 

skills, which will ensure the safest and most economic work. After replacing the new wheel brake disc, 

please pick and place the brake lever several times to fully extend the brake disc and restore the normal 

support resistance of lever.

Summary of Contents for Tornado TNT600

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands