TnT302S
39
f. The six sealing plugs on the cover strip align respectively to the six filling ports on the battery. Make sure the
ends of the six sealing plugs have been inserted into the filling ports on the battery; then press down firmly to fully
seat the cover strip until it is flush with the top of the battery.
Once the battery is filled with electrolyte, DO NOT remove the cover strip to add water, electrolyte or any other liquid.
Pay attention to the following matters while replacing the battery:
Before replacing the battery, first determine the model of motorcycle and check if both batteries are of the same
type. The battery used must be the same as the motorcycle was designed to use it. If a different type of battery is
used, it may affect the performance and service life of the motorcycle, and possibly cause an electrical failure.
If the motorcycle will not be used for a long time, remove the battery and charge it once a month.
THROTTLE CABLE ADJUSTMENT
1. Loosen the lock nut. 2. Turn the adjuster to bring the cable adjustment within 10~20mm.
3. Retighten the lock nut after adjustment of the cable clearance.
INSPECTION& MAINTENANCE
Warning
：
The battery will produce explosive gases when the chemical reaction occurs in it. Keep the
battery away from fire, sparks, and high temperature places. The battery is filled with sulphuric acid
(electrolyte). Electrolyte is a poisonous substance.
Please keep it out of the reach of children.
