TnT302S
14
15. ABS INDICATOR LIGHT (IF EQUIPPED)
1. ABS failure -- If any type of ABS failure is detected and
stored, ABS indicator light is lit and stays on after repaired,
then ABS indicator light will be unlit after the next Power
switch ON/OFF and when vehicle speed exceeds 5km/h.
2. ABS is under OFF mode --ABS indicator light Blink 1
time/1.27s (Slow Blink)
3. When pressing the ABS switch within 3s ~30s --ABS indi-
cator light Blink 1 time/0.32s (Quick Blink)
4. ABS is under ON mode -- When the ignition switch
turned on, the ABS indicator lamp will light and stays acti-
vated, until the motorcycle is ridden away, once reaching
about 3~5KM/H the ABS indicator lamp will be unlit.
LOCATION OF PARTS
Normally the ABS indicator light comes on when the
ignition switch is turned on and goes off shortly after
the vehicle starts moving. If the indicator light shows
any of the following, a fault or faults may have occurred
in the ABS. You should have the vehicle checked by an
authorized Benelli dealer.
a. The light does not come on when the ignition switch
is turned on.
b. The light remains lit after the vehicle is moving over
5km/h.
Remember that the ABS does not function when the
indicator light is on, but if only the ABS system fails
(without any other malfunctions in mechanical parts, for
example, brake hoses, master cylinders, brake callipers),
the conventional brake system should still work normal-
ly.
