background image

TWIG DISCOVERY PRO

5

Interval

: Time interval for status reports. A 

value between 

1

 and 

65535

 (minutes).

Example of a message: 

?ASR_0_1_10

. This message 

activates automatic reporting which sends status re-
ports once in every 10 minutes.  

Once activated,  automatic status reporting continues 
until cancelled by a deactivation message: 

?ASR_0_0

 .

If automatic status reporting activation/deactivation 
request is received from an authorized partner, it is 
handled and reporting is started/cancelled automati-
cally. Se

authorized  partners on  page 4

 for more in-

formation. If activation message is received from an 
unauthorized, or unknown partner, it is stored in Twig 
Inbox and needs your approval before the request is 
processed. For more information on messages in Twig 
Inbox, see 

twig inbox on page 13

.

INFORMATION MESSAGES 

Information messages (INF) are used to notify the re-
ceiver when certain events take place in your phone. 
These messages can be configured to be sent when 
one of the following events happen: 

The phone’s battery is getting low, it is con-
nected to/disconnected from charger, powered 

on/off, there is a poor satellite coverage, or 
battery temperature is out of range.

SOFTWARE PROTECTION  

Software protection is used to check that your phone’s 
product information matches with the phone’s soft-
ware version. If there is a wrong software version in 
the phone, a notification is given and the phone is 
powered off.

TRACKING

The tracking feature can be activated to send your up-
dated position information at a specified time interval 
and depending on given conditions. The feature can be 
activated by sending an MPTP (mobile phone telemat-
ics protocol) message to your phone. 

In Discovery Pro, the available tracking types are:

Circle area tracking, update limit tracking, 
time limit tracking, date and time limit track-
ing, endless tracking

Example of a tracking activation request: 

?TRG_7_1_10

. This message activates an endless 

tracking (type 7) to send your position updates once 
in every 10 minutes.

Summary of Contents for TWIG CONFIGURATOR





























Reviews: