Benefon TRACK PRO 1.1 Manual Download Page 121

Page: 121 / 193

MAIN MENU: TELEMATICS 115

tools are also available. For further in-
formation about the T9, please see the
chapter

Memo, Messages, Writing mes-

sages

. Press

NEXT.

Center point coordinates

Now you have two options to choose from:

Enter coordinates

and

Read current position

Select the desired option with

and press

- By selecting

Enter coordinates

you can

either use the previous coordinates if
they exist, or you can key in new co-
ordinates. Press

OK.

- By selecting

Read current position,

you can set your current position as
your center point coordinates. Press

OK.

Please note that in order to

read or set your current position, the
GPS needs to be turned on. For fur-
ther information about the GPS,
please see the chapter

Main menu,

GPS

SELECTING RADIUS

1. Select

Radius

with

and press

CHANGE.

2. Key in the desired radius in 10 meters.

E.g. by entering 20, your actual radius
will be 200 meters. You may also use the
previous setting if there is one.

3. Press

OK.

SELECTING ALARM MODE

By selecting

Alarm

, you can set an alarm to

alert you when crossing the borderline of
an area. The alarm can be set to alert either
when arriving in or departing from the par-
ticular area.

Select the desired option with

and press

Summary of Contents for TRACK PRO 1.1

































































































































































































Search results

Summary of Contents for TRACK PRO 1.1

Reviews:

Related manuals for TRACK PRO 1.1

Brands by name

Popular brands

Benefon TRACK PRO 1.1, Manual

Search results

Summary of Contents for TRACK PRO 1.1

Reviews:

Related manuals for TRACK PRO 1.1

Brands by name

Popular brands