Benefon SPICA TDP-60-HN Service Manual Download Page 24 | Manualshive

Page: 24 / 128

Benefon SPICA TDP-60-HN Service Manual Download Page 24

1.3.1999

6DP_60GB.fm

8

Product: TDP-60-HN / Installation Instructions

3.2.8 BENEBOOST KIT

The BeneBoost Kit is an extension for a car kit. It includes the BeneBoost car
amplifier (TDB-60), a coaxial cable, a system cable and a power cable. The
BeneBoost Kit sales package also includes an installation materials bag, which
contains the necessary installation equipment. On the next page you will find a
diagram of connections explaining how to install the BeneBoost Kit.

Caution:

The BeneBoost should only be installed by a Benefon authorized service
centre. The end user should never attempt to install the BeneBoost without
professional assistance. Professional installers have the required tools and
knowledge for installing the BeneBoost properly and safely. The terms of
warranty also require that the BeneBoost is installed by professionally trained
personnel. Cable routing may cause interference with the components of the
vehicle’s electronic systems (such as ignition and braking systems). It is
recommended that cables not be routed next to such electronic components.

3.2.8.1 BeneBoost

It is recommended that you place the BeneBoost in the trunk of the vehicle.
There has to be enough dry, free space around and above the BeneBoost and
there should not be any flammable materials nearby, because the BeneBoost
can heat up to 80°C under extreme conditions. You should therefore
place it at least 10 cm away from objects which might prevent its air circulation.

First slip the hex head screws into the slots of the BeneBoost and fasten the
mounting plates with the nuts. Then fasten the BeneBoost car amplifier in the
trunk with screws.

3.2.8.2 Coaxial Cable

Install the coaxial cable between the phone holder (KDS-60) and the PHONE
plug on the BeneBoost.

Connect the antenna cable to the ANTENNA plug on the BeneBoost.

3.2.8.3 System Cable

Connect the system cable USB-connector to the BeneBoost and AMP-
connector to the car box.

3.2.8.4 Power Cable

Obtain the necessary (+)-electrical current directly from the 12V battery of the
vehicle. Connect the fuse chamber to the (+)-wire, near the cable end. If
installation is made for a vehicle with a 24V electrical system, a 24V/12V DC
converter must be used. In this case the (+)-wire should be connected to the
+12V output of the converter.

The (+)-wire from the car kit, including its fuse chamber, will be connected to

«
...
22
23
24
25
26
...
»

Summary of Contents for SPICA TDP-60-HN

































































































































Reviews:

No comments