Benefon DELTA TDP-40-TN2 Service Manual Download Page 44

Page: 44 / 208

28.1.1999

TDP-40E5_fm5.fm

Product: TDP-40-TN2 (Delta) / Tuning Instructions

5.0.9 TX Audio Tuning

- Local 0 #, 36 #, 31 #, 21 #

- Feed via the local box GEN connector a 1 kHz sine signal at 4.0 Vrms, and

set the local box switch to the SERVICE position.

- Local 215 # (store mic level)

- Change the frequency to 2 kHz at 4 Vrms.

- Local 201 # 4 and use the +/- keys to set the deviation to 4.55 (+/- 0.15) kHz,

confirm with the F key.

- Change the signal frequency to 1 kHz at 400 mVrms.

- Press the 1 key and use the +/- keys to set the deviation to 3.00 (+/- 0.05)

kHz, confirm with the F key, and press the C key.

- Local 0#

Checking the deviation limiter:

- Local 36#, 31#, 21#

- Local 217#, change the level to 4.0 Vrms, frequency still 1 kHz. Use the +/-

keys to set the deviation above 3.7 kHz, and confirm with the F key.

- Local 0 #.

5.0.10 Microphone Level Adjustment

- Feed a 1 kHz sine signal acoustically to the microphone at a normal sound

level.

- Enter local 0 #, 21 #, press HF, 31 #, 201 # 7

- Use the +/- keys to set the deviation to 3.00 (+/- 0.05) kHz, confirm with the F

key, press the C key.

- Local 0 #

5.0.11 FFSKT Deviation Adjustment

- Local 0 #, 24 #, 31 #, 201 # 9

- Use the +/- keys to set the deviation to 4.20 (+/- 0.05) kHz and press F and C

keys.

- Local 0 #

5.0.12 FII Deviation Adjustment

- Set an RF-gen. mod. frequency 4 kHz / 600 Hz deviation, at - 50 dBm.

Summary of Contents for DELTA TDP-40-TN2

















































































































































































































Search results

Summary of Contents for DELTA TDP-40-TN2

Reviews:

Related manuals for DELTA TDP-40-TN2

Brands by name

Popular brands

Benefon DELTA TDP-40-TN2, Service Manual

Search results

Summary of Contents for DELTA TDP-40-TN2

Reviews:

Related manuals for DELTA TDP-40-TN2

Brands by name

Popular brands