12
BUTTON FUNCTION:
Power on & off
：
Power on
：
. LCD will display all segments with Bi sound as Drawing A.
Drawing A
Power off
：
. Without any signal been transmitted into the monitor for 4 minutes, and the monitor enter to SLEEP.
OPERATION :
1. When monitor power on (or press MODE, RESET key and hold for 3 seconds), LCD will display all segments with
Bi sound for one second and enter to SCAN mode as Drawing B.
2. With any signal been transmitted into the monitor, the value of TMR, DST, and CAL will start to count up as
Drawing C.
3. Without any signal been transmitted into the monitor for 4 minutes, the monitor will enter to SLEEP mode.
Drawing B Drawing C
ITEM DESCRIPTION
Reset
. In setting condition, press RESET key once to reset the current function figures.
. Press RESET key and hold for 2 seconds to reset all function figures, and have Bi sound for
prompt at the same time.
SET
. Each adding by pressing once, press and hold the button to increase the value faster
. TMR setting range: 0:00~99:00 (Each increment is 1:00)
. CAL setting range: 0.0~999.0 (Each increment is 1.0)
. DST setting range: 0.0~999.0 (Each increment is 1.0) KM
MODE
. Choose each function by pressing MODE key. In SCAN mode, press MODE key can lock the
current function.
. Press MODE key and hold for 2 seconds to reset all function figures.
Summary of Contents for ESB440
Page 1: ...Benefit ESB440 Bike 91104 ...
Page 3: ...3 EXPLODE DRAWING ...
Page 4: ...4 COMPLETE BIKE ASSEMBLY ...
