Benefit B425 91105, Assembly Instructions Manual

Page: 7 / 14

7
Step 1
1. Install the front stabilizer (41) with 2 carriage bolts(52), curved washers (53) and acorn nuts
(51) by using the hand tools. Make sure the transportation wheels are in correct direction.
2. Assemble the Rear Stabilizer (39) with 2 carriage bolts(52), curved washers (53) and acorn
nuts (51) by using the hand tools. Adjust the end caps on the rear stabilizer to set up a
stable, balanced position.
After assembling the bike, you can adjust to slightly uneven ground by adjusting the height of
the foot caps (40) in the back. The pre-assembled transportation wheels in the front allow
easy movement of the bike: The transportation-wheels need to point downwards and to the
front.
Step 2
1. Assemble the straps onto the pedals as the sketches. Adjust the ideal length of the straps
according to your foot size.
2. Assemble the two pedals (31 L/R) onto the crank (5) with a screw driver.
Remarks: screw the left pedal’s spindle counter-clockwise and the right pedal’s spindle
clockwise. Use a wrench (or screwdriver) to screw the two spindles completely.
2
1
Wrench
（
1
）