BeneCheck GLU, User Manual

Page: 8 / 21

10 11
Set the Year
1. Press the front button to advance one year until you get a
correct year number.
2. After you set the desired year number, press the back setting
button again then the
meter enters into month setting.
Set the Month
1. Press and release the front button until the correct month
appears.
2. Press the setting button and the day segment will start blinking.
Set the Day
1. Press and release the front button until the correct day appears.
2. Press the setting button and hour segment starts blinking.
Set the Hour
1. Press and release the front button until the correct hour
appears.
2. Press the setting button and minute segment start blinking.
3. Please back the cover onto the meter.
2.2 Set the Year/Month/Day/Hour/Minute/Temperature unit
After a battery is installed in the meter for the first time (as described in 2.1), the
meter goes into setting mode automatically.
The directions to setting mode.
Open the battery cover (on the back of the meter), press the setting button then
a
number such “08” will blink on screen, which means Year.
03-RN01-UM-01G BK使用手冊(英文)(文字檔)-210-11 10-11 2009/8/21 下午 04:51:18