5
4
GAS LEAK TESTING
PARTS IDENTIFICATION
GAS LEAK TEST INSTRUCTIONS
Note:
The gas leak test must be performed in an area that has
adequate lighting in order to see if bubbles are developing.
DO NOT
use a flashlight to check for bubbbles.
1. Create a mixture of 50% water and
50% liquid dishwashing soap.
2. Turn the gas cylinder valve to the OFF position (clockwise).
Then turn regulator valve to OFF position.
3. To turn ON the fuel supply, turn the cylinder valve
knob one turn counter-clockwise. Gas will flow through
and stop at the closed regulator valve.
4. Using a clean brush, apply the soap water mixture
to the following:
Cylinder Valve to Cylinder
Connection Nut to Cylinder Valve
Back side of Connection Nut to Brass Nipple
Brass Valve next to Regulator, or on Regulator
Regulator connection to Gas Supply Hose
Propane Cylinder Welds
Full length of Gas Supply Hose
Gas Supply Hose connection to Burner
5. Check areas
A-F
for bubble formation,
which indicate a leak.
6. Next, turn ON regulator valve to permit gas to pass through
the hose. Apply soap water mixture to full length of
gas supply hose and connection to burner assembly.
Check each place for growing bubbles,
G & H
,
which indicates a leak.
7. Turn OFF gas supply valve (clockwise) on propane Gas Cylinder.
8. Turn regulator valve to OFF position.
9. Tighten any leaking connections.
10. Repeat soap water mixture test until no leaks are detected.
DO NOT use cooker if gas leaks cannot be stopped.
For assistance contact a qualified appliance repair service.
11. After you are certain there are no leaks, turn tank valve and
regulator valve to OFF position.
Wait 5 minutes for any gas fumes to evacuate before lighting the burner.
WARNING:
If growing soap bubbles persist throughout any portion of the Gas Leak Test,
terminate use immediately.
GAS SUPPLY HOSE
Watch for Bubbles
Jet Cooker
Orifice Bar
Heavy Duty
Cast Iron
Hierro fundido de
alta resistencia
Auto-ignition
Control
Encendedor
directo de precisión
Adjustable
Flame Control
Selector de
calor ajustable
Dual Layer
Flame Rings
Doble anillo
de fuego
Weather Proof Coating
Revestimiento resistente
a la intemperie
0.6 PSI Certified Low
Pressure Regulator
Regulador de baja presión
certificado de 0.6 PSI
Extra Long
5-foot Hose
Manguera extra
larga de 5 pies
