BendPak 5175995, Service Manual

Page: 14 / 35

DIMENSIONS ARE IN MM
☺
A
B
9
3
1
10 7
4
18
23
22
24
16
6
DETAIL A
SCALE 1 : 6
11
2
30
5
27
25
26
29
28
2
2
DETAIL B
SCALE 1 : 8
19
15
17
15
13
12
14
21
20
NEXT ASSEMBLY
5245169
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5601176 GP-7LC/LCS TOP TROUGH WELDMENT 1 A
2 5601282 GP-7 CYLINDER PULL BLOCK WELDMENT 1 A
3 5600690 GP-7 POST SHEAVE PIN WELDMENT 2 B
4 5502211 CYLINDER ASSEMBLY Ø3.5 x 26.75 PULL CYLINDER 1 C
5 5215802 GP-7 SERIES PULL BLOCK TWIN SHEAVE ASSEMBLY 2 A
6 5216015 GP-7 TWIN SHEAVE ASSEMBLY, 48mm WIDE 2 A
7 5215549 GP-7 SERIES SHEAVE ASSEMBLY 2 D
8 5540010 E RING Ø32mm OD DIN 6799 2 --
9 5746521 GP-7 TWIN SHEAVE SPACER, 57mm LONG 1 A
10 5746283 GP-7 SHEAVE SPACER 1 C
11 5530239 SSS M8 x 1.25 x 20 1 --
12 5575112 D2/GP/PCL/XPR/PL-7000 SAFETY SHEAVE 2 C
13 5565350 D2/GP/PCL/XPR/PL-7000 SAFETY SHEAVE SPACER 2 C
14 5530756 HHB M6 x 1.0 x 25mm 2 --
15 5535357 NUT M6 x 1.0 NL 6 --
16 5736519 GP-7 CABLE RETAINER PLATE 2 C
17 5600693 GP-7 SAFETY SHEAVE BRACKET PLATE WELDMENT 2 A
18 5746285 GP-7 TWIN SHEAVE SPACER, SHORT 2 B
19 5545005 WASHER, M6 x 12mm FLAT 4 --
20 5530093 HHB M6 x 1.0 x 20mm 4 --
21 5530181 HHB M6 x 1.0 x 10 4 --
22 5505350 HAIR PIN 1/8” x 2 9/16” 2 --
23 5701437 GP-7 PULL BLOCK SHEAVE RETAINER 1 C
24 5530031 HHB M6 x 1.0 x 12mm 2 --
25 5736533 GP-7 TOP TROUGH CABLE TIE PLATE, TOP 1 C
26 5530794 FHSS M12 x 1.75 x 45 CL 10.9 2 --
27 5530792 HHB M12 x 1.75 x 45 CL10.9 1 --
28 5535041 NUT M12 x 1.75 NL CL10.9 3 --
29 5746466 GP-7 SERIES INNER SCISSOR BEARING SPACER 2 A
30 5530346 FHSS M10 x 1.5 x 20 CL10.9 2 --
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
H UPDATED BOM REVISION 12/24/2020 CA 01252
J REPLACED 5502530 WITH 5502211 01/14/2021 TM 01261
K UPDATED BOM REVISION 03/02/2022 CA 01396
WHERE USED
GP-7LCS
SHEET 1 OF 1
REV DWG. NO.
A
SIZE
TITLE:
NAME DATE
CHECKED
DRAWN
K
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
TM
5215737
GP-7LCS TOP
TROUGH ASSEMBLY
06/14/2017
DO NOT SCALE DRAWING
1:20 SCALE:
THIRD ANGLE PROJECTION
OR
03/07/2022
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
APPLY LOCTITE BLUE 242 AND CURE PER 2.
MANUFACTURE SPECIFICATION
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 3.
ASSEMBLE ITEMS AS SHOWN 4.
NOTE: UNLESS OTHERWISE SPECIFIED .