RBJ Series (15, 18, 25) Product Decal Positioning
A
C
D
B
Warning_Improper_Use_Label.pdf:
Size: 4”W x 2.5”H
Material: White Vinyl Pressure Sensitive Adhesive
Thickness: 4 Mil
Ink: U.V. protected CMYK 2/C Process
Finish: Polished
Print Process: Offset Lithography - 200 line-screen
or 300 p.p.i. for digital
Lamination: Clear-gloss over-laminate for abrasion,
chemical, and ultra violet protection
Warning_Dry_Air_Label.pdf:
Size: 7”W x 3.5”H
Material: White Vinyl Pressure Sensitive Adhesive
Thickness: 4 Mil
Ink: U.V. protected CMYK 2/C Process
Finish: Polished
Print Process: Offset Lithography - 200 line-screen
or 300 p.p.i. for digital
Lamination: Clear-gloss over-laminate for abrasion,
chemical, and ultra violet protection
2017_Serial_Tag-E-5905150.pdf:
Size: 3”W x 3”H
Material: 2 Mil. Gloss polyester thermal transfer
label with a high performance permanent acrylic
adhesive.
Ink: 1 Color-Black
Rolling_Jack_Service_Warning_Decal.pdf:
Size: 11”W x 1”H
Material: White Vinyl Pressure Sensitive Adhesive
Thickness: 4 Mil
Ink: U.V. protected CMYK 4/C Process
Finish: Polished
Print Process: Offset Lithography - 200 line-screen
or 300 p.p.i. for digital
Lamination: Clear-gloss over-laminate for abrasion,
chemical, and ultra violet protection
PN 5905552
PN 5905190
PN 5905156
PN 5905150
P/N # 5905552
SERVICE REQUIREMENT
EVERY 30-DAYS
Keep entire jack and pump unit clean and free
of debris. Lubricate both sides of all moving
parts and pivot points on jack unit with multi–
purpose lithium based grease, penetrating oil or
90-wt gear oil. Use enough lubrication to prop-
erly maintain all moving parts, but avoid over
application. Apply silicone lubricant to smaller
items such as handles and lock hinges. Always
promptly remove excess grease and debris from
jack unit and pump unit. If you choose to have
this equipment serviced by a service technician,
always perform a personal inspection of all points
to be sure nothing was overlooked. Warranty will
be void on this equipment if service maintenance
is not performed on a regular basis.
WARNING
PN 5905190
IMPROPER USE OF THIS ROLLING JACK
MAY RESULT IN SERIOUS BODILY HARM!
Always ensure that this rolling jack is positioned
correctly on the runway rail assembly BEFORE
raising the lift or working on or near the vehicle.
KEEP HANDS CLEAR of all pinch points.
NEVER use lift adapters other than those
specifically designed for this jack.
WARNING
WARNING
USE DRY AIR
SOURCE ONLY
Warranty will be void on this equipment if water
SERVICE PARTS AND LABOR NOT
COVERED UNDER WARRANTY IF RUST OR
CORROSION IS PRESENT.
The pump unit on this jack was not designed
to be used as a load holding device, jack must
be raised to a locked position at all times.
The manufacturer recommends installing
an automatic air line oiler in the air inlet line
as close to the pumping unit as possible. Air
pressure must be regulated to 125 P.S.I MAX.
Pump unit must be kept clean to prevent
contamination and pressure loss.
PN 5905156
contamination is found apparent. ALWAYS drain
air compressor tank daily or use in-line dryer.
