BENDIX BIW 103 W, Operating And Installation Instructions

Page: 9 / 28

9
WASHING 2 KG OF MIXED FABRICS AT 50°C
Suppose you have 2 kg of Mixed fabrics to wash. They
are rather delicate fabrics and should not be washed at a
high temperature.
1. Load the laundry
Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment
.
3. Measure out the fabric
softener
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
“MAX” mark in the drawer).
Close the drawer gently.
C0071
C0070
P0004
4. Select the required option
Depress the RINSE HOLD button if required.
5. Select the required programme
Turn the programme selector dial clockwise until the
marker on the top coincides with the programme 7.
6. Start the machine
Before starting up the machine check that:
●
the appliance is plugged in
●
the water supply taps are turned on
●
the drain hose is correctly and securely positioned
●
the door and the detergent dispenser drawer are
closed.
Depress the ON/OFF button: the mains-on light will
illuminate and the machine starts operating.
7. At the end of the programme
After the last rinse, the machine stops with the water left
in the wash tub, to prevent the fabric from creasing.
To drain the water, select programme “
10 ” (short spin)
or “ 14 ” (drain).
The door is controlled by a safety device which releases
2 minutes after the end of the programme.
Switch the machine off by depressing the ON/OFF
button again. The mains-on light goes out.
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
T0001S
on / off