BENDIX BIW 103 W, Operating And Installation Instructions

Page: 6 / 28

1 Programme guide
2 RINSE HOLD button
Press this button to make the machine stop with water
in the drum after the wash cycle. This prevents any
creasing which may take place if the clothes are left
damp in the drum. When it is convenient for you to
empty the machine, simply press this button again so
that the machine can proceed to drain and short spin, or
turn the dial to the drain programme “14” . If this button
is not activated, the washing programmes will end with
a short spin.
3 HALF LOAD button
Select this button to reduce water consumption on the
rinse cycle when washing a smaller load of cottons or
linens (maximum load size = 2.25 kg).
4 On/Off button
By depressing this button the machine starts operating.
When depressed again, the machine stops.
6
The Control Panel
5 Mains-on light
This light illuminates when the machine starts working
and goes out when the machine is switched off.
6 Programme selector dial
To select the required program turn the control
clockwise until the marker on the top coincides with the
number of the required program (reference mark on the
control panel). If at any chance you pass by the required
number
NEVER TURN THE CONTROL
ANTICLOCKWISE just continue clockwise until the
required number is reached again.
Before setting the dial to any position ensure that the
machine is switched off.