Bender UNIMET 1000ST, Operating Manual

Page: 9 / 100

9 TGH1256en/10.2005
2. Safety instructions
2.1 Delivery
Check the shipment container and device packaging for damage and compare the delivery
documentation with the content of the package. Equipment damaged in transit must not be
used. If equipment has been damaged in transit, contact BENTRON
®
immediately.
Equipment may only be stored in areas where it is protected against dust, damp, spray and
dripping water and where compliance with specified storage temperatures can be assured.
The selling company’s “General conditions of sale and delivery” always apply.
2.2 Intended use
Unimet test systems have been designed exclusively for use in the area of application
described in the chapter entitled “System description”.
Intended use also implies:
●
Observance of all instructions in this operating manual and
●
Compliance with possible test intervals
Use deviating from or beyond the scope of this is considered non-compliant. The BENDER
Group cannot accept any liability for damage resulting from such use.
2.3 Qualified personnel
Only appropriately qualified personnel may work on BENDER products. Qualified means
familiar with the installation, commissioning and operation of the equipment and have and
with training appropriate to the work. Such personnel must have read this manual and
understood all instructions relating to safety. BENTRON
®
would be happy to provide training
in respect of the use of the test equipment.
2.4 General safety instructions
BENDER equipment is designed and built in accordance with the state of the art and
accepted rules in respect of technical safety. However, the use of such devices may introduce
risks to the life and limb of the user or third parties and/or result in damage to BENDER
equipment or other property.
●
Only use BENDER equipment:
– As intended
– In perfect working order
– In compliance with the accident prevention regulations and guidelines applicable in the
location of use
●
Rectify any faults that may endanger safety immediately.
●
Do not make any unauthorised changes and only use replacement parts and optional