Bender UNIMET 1000ST, Operating Manual

Page: 7 / 100

7 TGH1256en/10.2005
1. Effective use of this manual
1.1 About the operating manual
This operating manual describes version 6.00 and higher of UNIMET® 1000ST and UNIMET®
1100ST. The functions and processes described may vary from those featured in other
versions. In the interest of increased clarity, this operating manual refers only to Unimet or
UNIMET® 1100ST. It has been designed for skilled personnel working in electrical
engineering and electronics.
Please read this operating manual before using the devices. This document must be kept in
an easily accessible location near to the device.
Although great care has been taken in the drafting of this operating manual, it may
nevertheless contain errors and mistakes. The BENDER Group cannot accept any liability for
injury to persons or damage to property resulting from errors or mistakes in this operating
manual.
1.2 Technical support
As a BENDER customer, you will receive technical support and assistance in the event of
queries relating to equipment you have purchased. Please contact the technical sales
department at BENTRON
®
.
BENTRON
®
GmbH & Co.KG
PO Box 11 61 • 35301 Grünberg • Germany
Carl-Benz-Straße 8 • 35305 Grünberg • Germany
Tel.: +49 (0) 64 01-807,731 • Fax: +49 (0) 64 01-807 739
E-mail: info@bentron.de • www.bentron.de
1.3 Explanations of symbols and notes
The following terms and symbols are used to denote hazards and instructions in BENDER
documentation:
This symbol indicates an immediate risk to life and limb.
Failure to observe the associated instructions and take appropriate precautions
will result in death, serious physical injury or substantial damage to property.
Danger !