19
TM800_D00165_00_M_XXEN/06.2015
4. Installation and connection
4.1 Installation
4.1.1
Overview of enclosure variants
The design of the alarm indicator and operator panels is based on the individual customer require-
ments in terms of interior design and the architect's and constructor's needs. In addition to the basic
versions also room-high stainless-steel alarm indicator and operator panels or other versions are
available.
The foil surface is completely closed, i.e. there are no screws needed for fixing the front plate. The
panel is easy to clean so that a high standard of hygiene is guaranteed. For additional protection, the
front panel surface can also be delivered with antibacterial surface.
Flush-mounting type enclosure with bezel frame (UPB)
A gap of up to 12 mm between the flush-mounted enclosure and the wall can be concealed by a bez-
el frame made of anodised aluminium. This version is recommended to be used for wallpapered
walls or walls with non-standard tiles, for example.
Flush-mounting type enclosure with mounting frame (UPE)
The mounting frame permits accurate and close wall mounting. The mounting frame is made of an-
odised aluminium. The mounting frame version is preferably used where the enclosure is required
to fit exactly the dimension of the tiles.
