11
isoPV1685-1685PFR_D00007_02_M_XXEN/10.2016
2. Safety instructions
2.1 General safety instructions
Part of the device documentation in addition to this manual is the enclosed "Safety instructions for
Bender products".
2.2 Work activities on electrical installations
If the device is being used in a location outside the Federal Republic of Germany, the applicable local
standards and regulations must be complied with. European standard EN 50110 can be used as a
guide.
Only
qualified personnel
are permitted to carry out the work necessary to
install, commission and run a device or system.
Risk of electrocution due to electric shock!
Touching live parts of the system carries the risk of:
• An electric shock
• Damage to the electrical installation
• Destruction of the device
Before installing and connecting the device, make sure
that the
installa-
tion
has been
de-energised
. Observe the rules for working on electrical installa-
tions.
DANGER
