Bender ISOMETER isoBAT425, Manual

Page: 26 / 35

Modbus register assignment of the ISOMETER® Modbus register assignment of the ISOMETER®
isoBAT425_D00308_04_M_XXEN/07.2020
26
3017 RW Parity "Adr 2" UINT 16 ---
0 = 8N1
1 = 8O1
2 = 8E1
3 = 8N2
3018 RW
Start-up delay "t"
during device start
UINT 16 s 0 …10
3019 RW
Response delay "ton"
for alarm relays "K1"
and "K2"
UINT 16 s 0 … 99
3020 RW
Delay on release "toff"
for alarm relays "K1"
and "K2"
UINT 16 s 0 … 99
3021 RW
Repetition time "test"
for automatic
device test
UINT 16 ---
0 = OFF
1 = 1
2 = 24
3022 RW Reserved --- --- ---
3023 RW Reserved --- --- ---
3024 RW
Test of the system con-
nection during device
test "nEt"
UINT 16 ---
0 = Inactive
1 = Active
3025 RW
Device test during
device start "S. Ct"
UINT 16 ---
0 = Inactive
1 = Active
3026 RW
Request stop mode
(0 = deactivate device)
UINT 16 ---
0 = Stop
1 = ---
3027 RW
Alarm assignment of
alarm relay 1 "r1"
UINT 16 --- Bit 10 … Bit 1*
3028 RW
Alarm assignment of
alarm relay 2 "r2"
UINT 16 --- Bit 10 … Bit 1*
3029 RW
Measuring pulse
period duration
UINT 16 ---
0 = auto 0.8 s
1 = auto 2.0 s
2 = 0.8 s
3 = 2.0 s
4 = 4.0 s
5 = 8.0 s
8003 WO
Factory settings for all
parameters
UINT 16 --- 0x6661 "fa"
8004 WO
Factory setting only
for parameters resetta-
ble by FAC
UINT 16 --- 0x4653 "FS"
8005 WO Start device test UINT 16 --- 0x5445 "TE"
Register Property Description Format Unit Value range
* Bit numbers of the alarm assignment can be found on page 28
RW = Read/Write; RO = Read only; WO = Write only
8006 WO Clear fault memory UINT 16 --- 0x434C "CL"
9800
to 9809
RO Device name
UNIT 16
(ASCII) -
refer to
chapter 8.
1.1
--- ---
9820 RO
Software
ID number
UINT 16 ---
Software ID
number
9821 RO
Software version num-
ber
UINT 16 --- Software version
9822 RO Software version: Year UINT 16
9823 RO
Software version:
Month
UINT 16
9824 RO Software version: Day UINT 16
9825 RO Modbus driver version UINT 16
Register Property Description Format Unit Value range