Operation
53
6.4.4
Menu 4: Control
This menu offers various options for controlling the EDS:
6.4.4.1
Control menu 1: TEST
Call up a test (see also "Carrying out a test" on page 34). To prevent this
function being carried out inadvertently, the operator must once again
confirm this entry.
6.4.4.2
Control menu 2: RESET
Call up a reset (see also "Resetting saved alarm messages (RESET)" on
page 35). To prevent this function being carried out inadvertently, the
operator must once again confirm this entry.
6.4.4.3
Control menu 3: Test communication
This function enables you to test communication between the EDS460-
DG and other BMS equipment. To do this, the EDS460-DG sends an
alarm message via the BMS bus until the "Test communication" function
is exited. A connected evaluation device (IRDH575, MK800, MK2430,
FTC470...) must process this alarm. Select a channel for this alarm mes-
sage.
Exit Exit
settings
1.TEST
Call up a test
2.RESET
Initiate a reset (see "Resetting saved alarm mes-
sages (RESET)" on page 35")
3.Test
communication
Test communication between the EDS460-DG
and other BMS equipment.
