Bender COMTRAXX CP9 Series, Manual

Page: 10 / 36

10 CP9xx-x_D00406_00_M_XXEN/04.2020
Product description
2.2 Device features
The CP9xx-x series includes the following variants of customised alarm indicator and operator
panels:
• CP9xx-F (only with front foil)
• CP9xx-G (only with glass front plate)
• CP9xx-H (with front foil and glass front plate)
The following basic types are described in the CP9xx-x series:
CP907-F, CP915-F, CP924-F with
front foil Control Panel with
COMTRAXX
®
CP9xx-F alarm indicator and operator panels are equipped
with a front foil behind which the various
touch monitors are installed.
CP907-F Alarm indicator and operator panel with complete CP907
(B95061080) integrated behind a foil (installation with
inspection window and retaining frame).
CP915-F Alarm indicator and operator panel with PCAP touch mon-
itor (15.6", 16:9 format).
CP921-F Alarm indicator and operator panel with resistive touch
monitor (21.5", 16:9 format).
CP924-F Alarm indicator and operator panel with resistive touch
monitor (24", 16:9 format). For the 24" version, the highly
transparent foil is used.
CP915-G and CP924-G with glass
front plate in bezel frame or
mounting frame
The CP915-G and CP924-G alarm indicator and operator
panels cannot be equipped with any further components
or accessories.
CP9xx-H Alarm indicator and operator panels with glass front plate
and foil front (15.6", 24", 16:9 format)
i
Since with the matt, antibacterial front foil the display surfaces of the monitors and also in-
spection windows of other components must be coated for better transparency, the use of the
highly transparent foil is preferred.
i
Foil touch panels are individually programmed and are usually connected to a remote or exter-
nal I/O control unit, which in turn is set up and parameterised individually according to the
project. Depending on the requirements, the CP9xx-x alarm indicator and operator panel can
be provided with one or two front plates. The front plates are usually hinged on the right or left
and right side.
i
The individual and project-related elevation illustrations, circuit diagrams, programming and
datasheets are also an important part of this manual. These must also be read and observed
prior to commissioning and operation.