Bender B94060120, Manual

Page: 6 / 16

Important information
6 DPM2x16FP_D00296_01_M_XXEN/09.2017
1.4 Inspection, transport and storage
Inspect the dispatch and equipment packaging for damage, and compare the
contents of the package with the delivery documents. In the event of damage
in transit, please contact Bender immediately. The devices must only be
stored in areas where they are protected from dust, damp, and spray and drip-
ping water, and in which the specified storage temperatures can be ensured.
1.5 Disposal
Abide by the national regulations and laws governing the disposal of this de-
vice. Ask your supplier if you are not sure how to dispose of the old equip-
ment. For more information on the disposal of Bender devices, refer to our
homepage at
www.bender.de -> Service & support.
1.6 Intended use
This manual provides a description of the Display module, which can only be
used in combination with Bender charge controllers. The charge controller is
designed for use in electric vehicle (EV) charging stations, wall boxes and
street light charging points. This document should be used together with the
Charge Controller operating manual(s), which can be downloaded from:
www.bender.de/en/service-support/downloads .
The Display module is a separate board and displays the current status infor-
mation as well as the charge status. The Display module can be connected to
the charge controller, the main component of a charging point, using a
standard
RJ45 cable . The second RJ45 cable can be connected to the RFID
module.
Electrostatic discharge (ESD) may cause damage to electron-
ic components. Observe precautions for handling electro-
static sensitive devices according to DIN EN 61340-5-1 and
DIN EN 61340-5-2.
CAUTION