manualshive.com logo in svg

Bender AF460, Manual

Share
Download
Bender AF460 Manual Download Page 16

16 TGH1402en/11.2020

Technical data

Connection

Connection type  ................................................................................................................................................. Screw terminals
Rigid/flexible/conductor sizes  .......................................................................................  0.2…4 / 0.2…2.5 mm

2

/AWG 24…12

Multi-conductor connection (2 conductors with the same cross section)

rigid/flexible  ........................................................................................................................................  0.2…1,5/0.2…1.5 mm

2

Stripping length  .......................................................................................................................................................... 8…9 mm 
Tightening torque  .................................................................................................................................................. 0.5…0.6 Nm

Other

Operating mode  ......................................................................................................................................... continuous operation
Position of normal use  ............................................................................................................................................................ any

Degree of protection, built-in components (DIN EN 60529)  ........................................................................................................  IP30

Degree of protection, terminals (DIN EN 60529)  ..................................................................................................................  IP20
Enclosure material  ................................................................................................................................................. polycarbonate
Flammability class  .......................................................................................................................................................... UL94V-0
DIN rail mounting acc. to  .............................................................................................................................................. IEC 60715
Screw fixing  ........................................................................................................................................ 2 x M4 with mounting clip
Weight  ............................................................................................................................................................................ ≤ 160 g

5.2 

Dimension diagrams

5.2.1  AF460 and SRCM420

Fig 5–1  Enclosure dimensions X460 and X420

5.2.2  Operator unit BG12-1

Fig 5–1  Views: Front, Side, Floor

Summary of Contents for AF460





























Reviews:

No comments

Brands by name

Popular brands

Load more brands