11
25-TON LOG SPLITTER - OWNER'S MANUAL
Machine Use And Care
Never operate the machine without good visibility or light.
Never attempt to split wood across the grain. The log splitter was not designed for
cross-grain splitting.
Always block the front and back of both wheels to prevent unintended movement.
Hold the bark side of the logs when loading or positioning, never the ends. Never
place your hands or any part of your body between a log and any part of the log
splitter.
Do not straddle or step over the log splitter during operation.
Do not reach or bend over the log splitter to pick up a log.
When stabilizing a log with the left hand, remove your hand when the wedge con-
tacts the log or serious injury may occur.
Never attempt to split more than one log at a time.
Do not attempt to load your log splitter when the ram or wedge is in motion.
Use your hand to operate the control lever on the valve. Do not use your foot, a rope,
or any extension device.
Do not move the log splitter while the engine is running.
Towing Safety
Check all local and state regulations regarding towing, licensing, and lights before
towing your log splitter.
Before towing the log splitter, check tires for excessive wear, cuts, or damage. Check
for proper tire inflation. Add air as required. Do not over inflate tires. Serious injury
can result if tires explode.
Check before towing to make sure the log splitter is correctly and securely attached
to the towing vehicle and the safety chains are secured to the hitch or bumper of the
vehicle with enough slack to allow turning. Always use a class I, 2" ball with this log
splitter.
Make sure the coupler is tight before towing and after towing 80 km (50 miles).
Never transport cargo on the log splitter. Never allow anyone to ride or sit on the
log splitter.
Always stop the engine, lock the beam in the horizontal position, and close the fuel
shut-off valve when transporting the unit.
