lower spindle
assembly
coin chutes
8
Jackpot holes
6-32 bolt and fibre nut
lower coin ramp
coin pointer
PLAYFIELD ASSEMBLY AND ADJUSTMENTS
IF YOUR COINS ARE GOING UNDERNEATH THE COIN
POINTER BEFORE THEY GET TO THE END OF THE POINTER, OR IF YOUR ROTATING
PLAYFIELD IS GETTING SCRATCHED IN A CIRCULAR PATTERN, YOU MAY NEED TO
ADJUST THE COIN POINTER HEIGHT.
HOW TO ADJUST:
1. OPEN THE WOOD FRONT DOOR AND LOCATE THE 6-32 BOLT AND FIBER NUT
HOLDING THE RED PLASTIC COIN POINTER TO THE METAL BRACKET.
2. LOOSEN THE NUT AND PLACE A .012 FEELER GAUGE IN BETWEEN THE COIN
POINTER AND THE ROTATING PLAYFIELD AND TIGHTEN THE NUT.
3. CHECK THE CLEARANCE AT DIFFERENT POINT ALONG THE COIN POINTER TO
MAKE SURE IT HAS EVEN CLEARANCE. RECLEARANCE AS NECESSARY.
rotating playfield
upper spindle assembly
upper coin ramp
Summary of Contents for GOLDZONE
Page 1: ......